friends,
these radgast and dvbapi settings
Where can we do dreambox two satellite devices and oe 2.6 software
I added a screenshot to my previous post.
There are 1,135 replies in this Thread which was already clicked 437,566 times. The last Post () by abu baniaz.
friends,
these radgast and dvbapi settings
Where can we do dreambox two satellite devices and oe 2.6 software
I added a screenshot to my previous post.
where the screenshot you uploaded is
I couldn't find it in dreambox webcontrol panel
That's why I asked
in oe 2.0 software i can see this screen
Display MoreWe need simple explanation to the difference between radgest and dvbapi , as I found that there's 2 types of oscam, one works with radgest and other works with dvbapi , and every oscam has different config and also e2 settings for stream is different .
Thanks
Older ICam patches didn`t have support for DVBAPI, so you had to use Radegast. Latest V5 patch has support for both options.
Regardless of which is used some settings will need applied within the E2 image menu.
Radegast:
CodeInclude ECM in HTTP streams on - YES Descramble HTTP streams - NO Descramble received HTTP streams - NO Load unlinked userbouquets - YES
DVBAPI:
CodeInclude ECM in HTTP streams on - NO Descramble HTTP streams - YES Descramble received HTTP streams - NO Load unlinked userbouquets - YES
These settings can be found by accessing the openwebif plugin (boxes ip address) in a browser > Extras > Settings > Customize
DVBapi & Radegast settings.png
Use these oscam configs:
linuxsat-support.com/filebase/file/583/
Use either radegast or dvbapi, not both at the same time. Disable/remove the option you aren`t using from oscam.conf
No other edits are required in these configs, just add your reader to oscam.server
I followed your settings literally, but dvbapi freezes as soon as it opens the channel, radegast works ok instead...
friends,
these radgast and dvbapi settings
Where can we do dreambox two satellite devices and oe 2.6 software
for dreamos 2.6 the setting is not relevant and not available
you can use both radegast or V5 dvbapi patched oscam i'm use radegast on my one
Hello,
using v5 patch on Openatv 6.4 / Vu+ UNO 4K SE, trying to use the usual channel list,
i got only ECMs with black screen , so then, back to the iCAM channel list, clear picture with ECM.
Does i need to change something to make it working on the usual list ?
Regards.
Another question , should I use modified fav for skyde in both cases or only in case of radegast ?
And in the dvbapi case I use the usual channel list ?
Yes, the stream relay channel list was for Radegast, you don`t need that for DVBAPI.
Now for me works only Daz*
where the screenshot you uploaded is
I couldn't find it in dreambox webcontrol panel
That's why I asked
in oe 2.0 software i can see this screen
try the setting in config
[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D,098C
stream_relay_icam_ctab = 098D,098C
i need userbouquet.ttc_icam_skyde and bouquet that works with latest oscam and oscam conf,oscam dvbapi,oscam server,oscam user fix to work with this latest oscam icam and someone to explane procedure to work sky de
stream_relay_icam_ctab = 098D,098C
this string has no function thats dummy
i need userbouquet.ttc_icam_skyde and bouquet that works with latest oscam and oscam conf,oscam dvbapi,oscam server,oscam user fix to work with this latest oscam icam and someone to explane procedure to work sky de
all files is in my signature and filebase and small Howto to add sky_icam_list inside
i need userbouquet.ttc_icam_skyde and bouquet that works with latest oscam and oscam conf,oscam dvbapi,oscam server,oscam user fix to work with this latest oscam icam and someone to explane procedure to work sky de
all files is in my signature and filebase and small Howto to add sky_icam_list inside
i put new oscam-svn11714-arm_dream-webif-dvbapi-ssl-libusb-emu798 and your oscam_config_simple_by_atari_V6.4_Icam and still not working.why?
add sky_icam_channel list ?
check oscam webIF
-emu on
important server
don`t think configs and oscam_icam are magic and open sky de !
everyone need local card or tier 1 server
Display MoreHello,
using v5 patch on Openatv 6.4 / Vu+ UNO 4K SE, trying to use the usual channel list,
i got only ECMs with black screen , so then, back to the iCAM channel list, clear picture with ECM.
Does i need to change something to make it working on the usual list ?
Regards.
Another question , should I use modified fav for skyde in both cases or only in case of radegast ?
And in the dvbapi case I use the usual channel list ?
Yes, the stream relay channel list was for Radegast, you don`t need that for DVBAPI.
Me too, the sky is working only in stream channel list, in standart list is black with ecm with patch v3 dvbapi
can someone please state where the icam patch is for oscam 11714 ubuntu server is please
can someone please state where the icam patch is for oscam 11714 ubuntu server is please
Vanilla OSCAM works with DVBAPI
Display MoreHello,
using v5 patch on Openatv 6.4 / Vu+ UNO 4K SE, trying to use the usual channel list,
i got only ECMs with black screen , so then, back to the iCAM channel list, clear picture with ECM.
Does i need to change something to make it working on the usual list ?
Regards.
Another question , should I use modified fav for skyde in both cases or only in case of radegast ?
And in the dvbapi case I use the usual channel list ?
Yes, the stream relay channel list was for Radegast, you don`t need that for DVBAPI.
Same problem with me
Display Moreadd sky_icam_channel list ?
check oscam webIF
-emu on
important server
don`t think configs and oscam_icam are magic and open sky de !
everyone need local card or tier 1 server
you are right , the main problem now is the working cline.
@Chris230192
all channels or 5-8 channels ? Vanilla sky ?
can someone please state where the icam patch is for oscam 11714 ubuntu server is please
Vanilla OSCAM works with DVBAPI
can you give more details and direction please
can someone please state where the icam patch is for oscam 11714 ubuntu server is please
Vanilla OSCAM works with DVBAPI
can you give more details and direction please
Yes well to be fair I don't know the details for anything other than x86 Linux with TVH. You may well still need patches for E2 etc... I don't know.
But for PC using TVH, you just need vanilla OSCAM with patched TVH. RE: Oscam Icam TVHeadend
can some one upload oscam-icam v5 patch here please.
Don’t have an account yet? Register yourself now and be a part of our community!