I have windows 10...
It could be the drivers...I have usb to serial cable...and found this driver online (attachment)...before I had another one but could not open comport...maybe too old for windows 10...
I have windows 10...
It could be the drivers...I have usb to serial cable...and found this driver online (attachment)...before I had another one but could not open comport...maybe too old for windows 10...
.You need drivers. There is no usb serial. I have windows 10 and they work without problems. I think you need to find drivers for windows 10.
.Look here if anything can help you.
https://www.catalog.update.mic…=usb%20serial%20converter
Look at the motherboard you have on your computer and try to find usb drives for your motherboard.
Thanks for the feedback...
Still trying...but in device manager cannot see usb to serial...
I just have as in attachment....
.Look at this page, you have Driver version 3.8.41.0.
https://www.catalog.update.mic…B-to-Serial%20Comm%20Port
It is possible that your usb serial cable is defective.
.Look at this page, you have Driver version 3.8.41.0.
https://www.catalog.update.mic…B-to-Serial%20Comm%20Port
It is possible that your usb serial cable is defective.
Will let you know... tried the latest from the home page of Prolific..
.Look at this page, you have Driver version 3.8.41.0.
https://www.catalog.update.mic…B-to-Serial%20Comm%20Port
It is possible that your usb serial cable is defective.Will let you know... tried the latest from the home page of Prolific..
Do you use rs232 cable crossover?
It showed on the device list...!
At least the first step....
The problem now is that both with dreamup and Japhar, comports cannot be found....
.When he is here, he will see and help you. I hope you will solve it.
From the link you have sent me I installed the first one on the list....I assume its for windows 10 as well....
.Look at this page, you have Driver version 3.8.41.0.
https://www.catalog.update.mic…B-to-Serial%20Comm%20Port
It is possible that your usb serial cable is defective.Will let you know... tried the latest from the home page of Prolific..
Do you use rs232 cable crossover?
I am using usb to rs232 serial cable....
When you open JapharFlasher, can you change the port on it?
Both Japhar and dreamup are not opening...but a window opens that comports cannot be found...
He wrote to you that you need to activate the network and choose an IP for your computer, because it will detect the box with RS232 and load SSL, but then send the image with http/web connection through the router/modem.
Hi smoky
For open comports you need to install CP210x Windows drivers which I have installed for my dream 800se.
Also when you connect with DreamUP untick 'Use Network' , you don't need it.
.Look at this page, you have Driver version 3.8.41.0.
https://www.catalog.update.mic…B-to-Serial%20Comm%20Port
It is possible that your usb serial cable is defective.Will let you know... tried the latest from the home page of Prolific..
Do you use rs232 cable crossover?
I am using usb to rs232 serial cable....
I know that. But cable connected between port and dreambox must be crossover,
Later i will upload photos with my configuration
Regards
PakTo
Hi smoky
For open comports you need to install CP210x Windows drivers which I have installed for my dream 800se.
Also when you connect with DreamUP untick 'Use Network' , you don't need it.
I installed those drivers yesterday... tried again but still the same... The attachment shows the error 37.
Cannot run dreampup or japhar as window opens saying can't find any comports ....as posted earlier in this thread....
Try installing these serial port and null-modem drivers. You might need these for connecting to a null-modem cable for the dm8000.
FREE Virtual Serial Ports driver, Rs-232 null modem emulator
Don’t have an account yet? Register yourself now and be a part of our community!