Two cards one server

    • Scripts OSCam
  • andy ray
  • Thread is marked as Resolved.

There are 16 replies in this Thread which was already clicked 2,537 times. The last Post () by musogeek.

    Hi im going to buy myself a cheap card to add to my server my question is how do i set up the config so it will work with my current setup, iam using oscam and ccam this is my current setup that works with sly uk using an n=line in my cfg file with the 256 trick thanks


    oscam server


    reader]
    label = ***UK
    protocol = pcsc
    device = 0
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown = 1
    emmcache = 1,3,2
    group = 1
    caid = 0963
    lb_weight = 101
    ecmwhitelist = 0963:3E,42,44,45,47,4E,4F,53,54,61,62,67,68,69,6A,6B,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B
    saveemm-u = 1
    saveemm-s = 1



    oscam user


    [account]
    user = *********
    pwd = *******
    monlevel = 0
    uniq = 0
    group = 1
    au = ***UK
    caid = 0963



    oscam config



    [global]
    nice = -1
    logfile = /dev/null
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    serialreadertimeout = 1500
    maxlogsize = 10
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    keepalive = 1


    [newcamd]
    port = 10000@0963:000000
    key = 0102030405060708091011121314




    [webif]
    httpport = ****
    httpuser = ****
    httppwd = *****
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

    oscam server



    oscam user




    oscam config



    separate nlines as per each account in oscam.user - note the different port for each card - these have to be correct in each nline in CCcam.cfg

    If I take a while to respond, you can see why.....


    :red:

    Edit looks like you have answered two questions i think the only one remains is how to set up your fline and cline in the cfg file is it the same as usual

    sorry think i answered the CCcam.cfg nline question in an edit to my original reply. You are better off putting each card in a different group so you can have better control of your server. As I said each card put in a different group, and each card create a different port in newcamd protocol, and create a separate nline in CCcam.cfg for each card/port.

    If I take a while to respond, you can see why.....


    :red:

    Thanks for clearing that up can i ask how do i set up my new fline and your cline if i want a peer to share say only my sly card or my new card or even both

    Sorry my friend ive edited the previous question




    Quote from musogeek

    Yep just set them up as normal. As you set up 2 nlines with the 256 it will show as 2 locals.

    Cheers what i was trying to ask was is if i want to limit a new peer to a my new card only and not my sly card how do i setup the f-line




    Quote from musogeek

    Yes i noticed - my reply was confirming that you set your f and c lines as normal:sheep:

    Yes you can restrict your flines so you are not sharing a particular caid

    Code
    F: user pass 2 0 0 { 0:0:2, 0963:000000 } { } { }


    not used it before but from what i understand the above will stop you sharing anything on 0963

    If I take a while to respond, you can see why.....


    :red:

    Rome wasnt built in a Day Buddy!


    All info within the Forum...just need to find it.....SearchBar Good!


    If you have any problems/issues with anything just drop a friendly post and someone will clear it up for you!


    SIMPLES



    lssdalogo.png



    "Don't Gain The World & Lose Your Soul, Wisdom Is Better Than Silver Or Gold"
    “Herb is the healing of a nation, alcohol is the destruction”



    hi i got a satellite bg card today to add to my server dose this config look correct... also im not sure how the second Nline would look


    [global]
    nice = -1
    logfile = /dev/null
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    serialreadertimeout = 1500
    maxlogsize = 10
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    keepalive = 1


    [webif]
    httpport = 8888
    httpuser =
    httppwd =
    httprefresh = 10
    httphideidleclients = 0
    httpallowed = 192.168.0.0 - 255.255.255.255
    debug = 255


    [newcamd]
    key = 0102030405060708091011121314
    port = 34001@0100:000068;34002@0B01:000000



    [reader]
    label = CYFRA
    Protocol = internal
    detect = CD
    device = /dev/sci0
    Group = 1
    EMMCache = 1,3,2
    CAID = 0100
    ident = 0100:000068



    [reader]
    label = SATELLITEBG
    Protocol = internal
    detect = CD
    device = /dev/sci1
    Group = 2
    EMMCache = 1,3,2
    CAID = 0B01
    ident = 0B01:000000





    [account]
    user = linuxsat
    pwd = support
    monlevel = 0
    uniq = 0
    group = 1
    au = CYFRA
    caid = 0100
    ident = 0100:000068



    [account]
    user = linuxsat
    pwd = support
    monlevel = 0
    uniq = 0
    group = 2
    au = SATELLITEBG
    caid = 0B01
    ident = 0B01:000000

    ok it see the card and i can see entitlements on the card but its offline in cs studio and in web info there is this message


    2012/08/15 20:06:58 57C120 c WARNING: invalid client tcp_conn_close()
    2012/08/15 20:06:58 57C120 c linuxsat disconnected from 127.0.0.1
    2012/08/15 20:06:58 57C120 c thread 74D074B0 ended!

    change the user on the second user account (in oscam.user) to 'linuxsat2' = and amend the second nline accordingly in CCcam.cfg - else you will have two user accounts with the same name.

    If I take a while to respond, you can see why.....


    :red:

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login