I set up cccam on my openbox s10 i manged to get them on line but the channels are still scrambeled
help please
I set up cccam on my openbox s10 i manged to get them on line but the channels are still scrambeled
help please
are you sure the Line is Active and correct mate check in the menu and make sure the line is set as active Just to be sure,Also make sure your box is connected fine to the internet
yeap i tested the line and they came up green ,yes it connect to the inet ,and there all active to , they seem to go online then login quite a bit ,could this besomething to do with it?
if there *free Lines from on the net then maybe there Just being used or no longer free
Best way is to Use a Line from your own Card or A share from someone you know
yeap so got my own card and cline comes up as online and active , i go into the channel and still scrambel is there some setting ive missed or some file im missing
Quoteyeap so got my own card and cline comes up as online and active
The above is not making sense to me, also taking in to account your previous posts/threads - please explain your setup.
I got this of the net that might help you,
Adding clines to your OpenBox s9 / s10
For those of you who for one reason or another, are experiancing difficulties adding clines, I have put together this basic tutorial showing how to add clines.
First download the attached test cccam.cfg file at the bottom of this page.
Once unzipped open the file and overwrite the test clines with your own active clines, then save the changes.
Now add the cccam.cfg file to a USB Stick, do not zip the file, add it as is.
Then place the USB Stick that contains the cccam.cfg file, into the USB connector at the rear of the receiver.
Now go to Menu -> Network Local Settings and select CCcam Plug Setting and click the OK button
39f1df94d83.jpg
Now select Update Files by USB and click the OK button.
e93f66361e15a41e43.jpg
Now select CCcam,cfg [CCcam Plug] and click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything, and nothing will be installed.
263ab10e52ada1.jpg
If there is no tick displayed, select CCcam,cfg [CCcam Plug] and click the OK button
Once the tick is displayed, click the Yellow button.
Now select CCcam Plug Setting and click the OK button.
Now select option 1 .. CCcam.cfg and click the OK button.
Now highlight each cline you wish to activate, by clicking the OK button, a tick will appear next to each cline you have activated.
Finally check your Network Settings are configured correctly.
If your router supports DHCP turn it ON and click Apply.
If your router do not support DHCP you will be required to set it up manually, click Apply once you have set it up correctly
Now reboot your receiver, and if all is okay, you may start viewing channels, if not check the cline restrictions if they are correct.
maybe your line is for a differant package ???????
Just because its online means nothing you can still connect to a server but if the card is not in you get nothing but online ,if its on an enigma 2 box it shows blue with no card , test with another line first before you think its you and if you bought your line well you were likely caught as everyone is
ive done all of that .iv been doing some`reading and people go on about diffrent versions of cccam how do i no witch 1 i need or is there mutilpe versions that i need ?
For that box mate i doubt that is the issue!
You could look at making sure the firmware is up to date!
Have you tried using a different cam Mgcamd (input line manually through menu using details from current line) and see if that works?
I presume your getting the FTA channels?
I presume your not getting any PREMIUM channels.....sly 1, sports, movies? Any or None?
Your internet is working (if you have youtube plugin try and access....you may need to change DHCP in network settings)
Apart from that it would probably be server end, Your channels are clearing from server (if you have lol) Have you tried line on different box?
Hopefully one of the above options will get you going
Hmmmm, I am currently using a a test line that was for 48hrs however its 3 days past that and it is still working smoothly , i thought they just cut you off atfer the 48 hrs
Hmmmm, I am currently using a a test line that was for 48hrs however its 3 days past that and it is still working smoothly , i thought they just cut you off atfer the 48 hrs
are you asking to be put out ther door posting this every where :agony:
I put it 2wice, you could just answer me rather than post that
I put it 2wice, you could just answer me rather than post that
And stu - maybe you should read the forum rules.
We do not support anyone using payservers. Test line = payserver.
This site is for users sharing the same hobby mostly contributing not by disrespecting the rules.
case closed
Don’t have an account yet? Register yourself now and be a part of our community!