ok, but then how does cccam/mgcamd pass along emm's to oscam?
s*y trying again
- scoot1690
- Thread is marked as Resolved.
-
-
you read your card in oscam as cardserver only then pass card to cccam as normal . But i would always make sure you have mgcamd on your own client box to emm update your card in oscam . All the info is on this forum if you look
regards
new2
-
thanks newtolinux, im just trying to get my head around on how this all works. If your blocking all emm's on oscam (unique, unknown, global, special) then does cccam still pass on emm's?
-
I agree new2 about the mgcamd part as i have seen people reporting that they have even had emails from sly wanting the card back after they switched it off and you guessed it they were all using cccam,also these reports of cards being unpaired and of course entitlement problems so i,d steer clear of cccam too from what i have been reading.
-
So i phoned *** ! and i just asked them to switch on my card because i cant watch any movies . .. . . . .. . .they say its strange and should be no reason why not !
i explain there is a message on the screen about the wrong card and suggest my young son may have tamperred with the card as on occasion i have found it in his toy box . . . . . .they switch on the card ! phew i thought i was out of the game then !
now i set up oscam and have everything working fine including local share to another box ! can anyone point me in the right direction for keeping the card upto date emtitlements using mgcamd ? ? ?
thanks to this forum for all the help they give me -
So i phoned *** ! and i just asked them to switch on my card because i cant watch any movies . .. . . . .. . .they say its strange and should be no reason why not !
i explain there is a message on the screen about the wrong card and suggest my young son may have tamperred with the card as on occasion i have found it in his toy box . . . . . .they switch on the card ! phew i thought i was out of the game then !
now i set up oscam and have everything working fine including local share to another box ! can anyone point me in the right direction for keeping the card upto date emtitlements using mgcamd ? ? ?
thanks to this forum for all the help they give me
This is what you need mate, -
so oscam server should look like this but with the 6 digit box key from cccam
[reader]
label = lower card
enable = 1
protocol = internal
device = /dev/sci0
caid = 0963:000000
# 0963 is *** UK.
boxid = *********
# Oscam can read a *** card i.d, but you can also put this
# in manually
detect = cd
cardmhz = 357
# this helps the card run more smootly
group = 1
# Oscam has the concept of groups. Only users in group 1 can
# use this reader. I'm only using one group.
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
# these ensure smooth decrypting
lb_weight = 101
# for load balancing - can be commented out. -
so oscam server should look like this but with the 6 digit box key from cccam
[reader]
label = lower card
enable = 1
protocol = internal
device = /dev/sci0
caid = 0963:000000
# 0963 is *** UK.
boxid = *********
# Oscam can read a *** card i.d, but you can also put this
# in manually
detect = cd
cardmhz = 357
# this helps the card run more smootly
group = 1
# Oscam has the concept of groups. Only users in group 1 can
# use this reader. I'm only using one group.
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
# these ensure smooth decrypting
lb_weight = 101
# for load balancing - can be commented out.
Yes but also remove the spaces between the boxkey digits or it will not work.
e.g 12 34 56 78 becomes 12345678. -
do i need to change anything in ccam like put # back infront of box id or not do i have to close the gaps in ccam box id as post above says or just leave as normal
then do i just put boxid in oscam
im not on a share i have paid sub
thanks -
Maybe I'm wrong, but I thought you only needed oscam if your running a server or sharing, if you've only got a pay sub, you only need cccam...
-
Maybe I'm wrong, but I thought you only needed oscam if your running a server or sharing, if you've only got a pay sub, you only need cccam...
This is correct, i was under the impression seasider was sharing this card himself, it is the person you are sharing with who needs to change, as a client only you can continue using cccam alone. -
redevil you will need oscam regardless soon to read the sly card. SOme channels already can only be opened via oscam ; i.e pick TV. CCcam or newcs no longer opens this channel so there is obviousely some sort of test sly are doing. I imagine it wont be long until all transponders on 28.2 astra sat adopt the same algo change on their encryption . CCcam is a dead project now and the future lies in oscam at the moment. Once you have used cccam and mgcamd you would not want to mess around with cccam anymore !! just my 2 penneth worth
new2
-
So there would be no harm in messing around with oscam now then.
-
would get practising buddy . wont be long until its needed in my opinion. cccam is dead project now anyways
-
Just had a look, in my d/l manager, using d/e pheonix edition for 800hd. It has oscam 2.9.01 + Cccam 2.1.3 in there, is it as easy as d/l it and editing the config ?. I too am with a pay server, when it runs out I will have a crack at the sharing.
-
tut tut red devil , why pay a payserver when you can share amongst a close group of friends. downloading from d/l manager is fine to do . You will just need to amend all configs etc.
regards
new2
-
Remember that moving to oscam & cccam will not mean the channels sly are testing on will open. For you to be able to view them it is the person sharing the card that needs to change. Pick tv will clear using cccam alone providing the person you are getting the share from is using oscam at their end.
-
@tenbelow
thanks for the info i to have the same img as reddevil so i guess i can just download it from there
also im not sharing at the mo but will be giving ago im not in it for the cash just share back from others
even though im not sharing pick tv still dosent open but all other channels do but if i do share then what you are saying is i have to run oscam is that correct -
Yes sooner rather than later to be able to share this card you will need to be running oscam.
-
tut tut red devil , why pay a payserver when you can share amongst a close group of friends. downloading from d/l manager is fine to do . You will just need to amend all configs etc.
regards
new2
It was just to get me started and took a 6 month sub, but it's flawless. But I'm getting myself ready for the future now lol.
Remember that moving to oscam & cccam will not mean the channels sly are testing on will open. For you to be able to view them it is the person sharing the card that needs to change. Pick tv will clear using cccam alone providing the person you are getting the share from is using oscam at their end.
cheer's Ten, I do understand this bit, with my limited knowledge lol, but I can still use oscam + cccam as a client at the mo, yes ?
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!