no you need to extract the .zip file and copy the vuplus folder to the USB stick.
Posts by pheonix
-
-
i tried Vu+ and Wetek and Wetek on DVB is minimum so good as Vu+...
phoenix you should try one, really m8!
I very, very, very much doubt those claims. as for KODI I use a Amazon Fire TV box and it does every thing I need.
-
am i missing something?
Well yes, the Image being used and the build number if applicable. we are not mind readers you know.
Also list the skin being used etc.
-
Personally I would say go for a Vu+ receiver but you wont get one capable of running XBMC / KODI for less than £170, the watek I have no experience with but I very much doubt the satellite side would be in any where comparable with a proper Enigma2 based receiver and that would be the part that would let the side down for me.
-
Depends on what you want out of your satellite receiver. it's all good and well buying a all in one jobbie but the old saying "jack of all trades, master of none" springs to mind here.
-
If you used the backup manager then you have not created a full backup, just a settings and plugins backup.
ViX> Blue button> Backup manager = This creates a plugins and settings backup. Please note that this backup requires a active internet connection to restore plugins as they are downloaded from the image feeds.
ViX> Blue button> Image manager = This creates a FULL image backup that can be restored to the same receiver or another receiver of the same make and model.
-
-
OpenViX-Apollo153 AVAILABLE NOW
The worlds first Enigma2 Team to give you FULL 1920x1080 HD Skin support
with thanks to Rossi2000.OpenViX Apollo-Enigma2 GIT CHANGELOG
Code
Display Moreopenvix: build 1058 Merge pull request #16 from AbuBaniaz/master AV options for receivers with HDMI and RCA only Merge branch 'Dev' ServiceName2: remove as now we get transponder info from ServiceName Merge branch 'Dev' change to SetupEntry for skin_display tweak skin_display sizes and add ABM to another display Update de.po add ABM to skin_displays ServiceName: add modulation to transponder infoOE-ALLIANCE GIT CHANGELOG
Codeopenvix: build 153 [ew7356] remove inetd.conf not needed [3rd-party plugins] Update add enigma2-plugin-skins-blackspirit.hd git now fixed VUPLUS: fix srcdate in duo2 VUPLUS: update drivers, proxy drivers and utils
Images can be downloaded directly from the OpenViX server ( Link Below )
via a online update
menu> setup> software update.
OR
Via a Telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6
OpenViX-Apollo-Enigam2 GIT CHANGELOG
Click HereOE-ALLIANCE GIT-CHANGELOG
Click HereSome softcams now available from the image feeds.
OpenViX-IMAGES & OpenViX HD-IMAGES
Click HereOpenViX Tutorials
Click HereFollow us on Twitter Click Here
Follow us on Facebook Click Here -
OpenViX-Apollo152 AVAILABLE NOW
The worlds first Enigma2 Team to give you FULL 1920x1080 HD Skin support
with thanks to Rossi2000.OpenViX Apollo-Enigma2 GIT CHANGELOG
Codeopenvix: build 1057 openvix: build 1056 Update de.poOE-ALLIANCE GIT CHANGELOG
Code
Display Moreopenvix: build 152 [***lake] add hd500c [blackbox] update drivers fix T2/T2 Tuner Board [g300] cleanup conf Bump enigma2.bb due to change in fonts add sf3038 remove distro axas-support no longer exist Merge pull request #80 from cr3pt/patch-3 fix filename error [3rd-party plugins] Update [openhdf] changed duo_VFD.patch [et8500/et7x00] Drivers Update [ceryon] fix drivers and remove dummy oem model p62 openvix: build 151 Version bump Fix IPv6 support for Fulan boxes [openatv] remove supportchannel [dags] update drivers, fix timeshift german hdplus channels [E2 settings] Deleted some no longer maintained sets. xxxxxxxxxxxxxxxxxxxxxxxx [3rd-party plugins] Update [ceryon] add oem nano and nano-c [openatv] update bootlogo and spinner xxxxxxxxxxxxxxxxxxxxxxxx [entwopia] update drivers 7356 new sdk add multitranscoding Revert "fix blackspirithd skin" [blackbox] update drivers add openopera support fix blackspirithd skinImages can be downloaded directly from the OpenViX server ( Link Below )
via a online update
menu> setup> software update.
OR
Via a Telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6
OpenViX-Apollo-Enigam2 GIT CHANGELOG
Click HereOE-ALLIANCE GIT-CHANGELOG
Click HereSome softcams now available from the image feeds.
OpenViX-IMAGES & OpenViX HD-IMAGES
Click HereOpenViX Tutorials
Click HereFollow us on Twitter Click Here
Follow us on Facebook Click Here -
looking at your screenshot you have imagebackups as the parent folder which contains the vuplus folder....
Actually thats the correct file structure if you want to use the image manager to couch flash the image from the USB stick or any other attached storage media.
- - - Updated - - -
Actually thats the correct file structure if you want to use the image manager to couch flash the image from the USB stick or any other attached storage media.
I believe there is a bug preventing backup images created with the image manager from being reflashed back to the Zero, you can reflash them using the image manager and I have created a bug report to see if it is a genuine reproducible bug.
-
OpenViX-Apollo150 AVAILABLE NOW
The worlds first Enigma2 Team to give you FULL 1920x1080 HD Skin support
with thanks to Rossi2000.OpenViX Apollo-Enigma2 GIT CHANGELOG
Code
Display Moreopenvix: build 1055 openvix: build 1054 openvix: build 1053 [Translations] NL update Merge branch 'Dev' ParentalControl: Clone more configs for backwards compatibility ParentalControl: Add more config clones (settuppin, settuppinactive) There are still some 3rd party plugins which we cannot fix that depend on it and these plugins do have users. ParentalControl: Add configured config as clone from servicepinactive As some plugins seems to need it and there are also some 3rd party plugins which we cannot adapt. [ParentalControl] No longer needed as has been fixed in OpenWebIF and EPGRefresh remove DAGS cup load hack. remove DAGS cup load hack. back to TV with Menu button from choose tuner screen ServiceScan: make error descriptions translatable [ParentalControl] missing config. Without this OpenWebIF will not zap. [ParentalControl] missing config. Without this OpenWebIF will not zap. Update de.po ParentalControlSetup: Remove 'some' not required code [SkinSelector] Fix incompatible merge [SkinSelector] Fix incompatible merge Merge branch 'Dev' of https://github.com/OpenViX/enigma2 into Dev InfobarGenerics: fix info button for eventview and not epg. thx andy! openvix: build 1052 Revert "ParentalControl: Solution for OpenWebIf" Revert "[ParentalControl] add missing config. Without this OpenWebIF doesn't work." Revert "ParentalControl: Solution for OpenWebIf" Revert "[ParentalControl] add missing config. Without this OpenWebIF doesn't work." openvix: build 1051 openvix: build 1050 openvix: build 1049 openvix: build 1048 [ParentalControl] add missing config. Without this OpenWebIF doesn't work. fix replacing chars in channelselection ChannelList - display item's name in question when is item deleted from bouquet Make it also possible to select startservice for Standby ClockToText - optional parameter for adding or remove initial space when is used %2d formating in Default or WithSeconds. Parameters can be: Proportional and NoSpace separated with ';' Example:<convert type="ClockToText">Default;Proportional</convert> skineable distances between item in servicelist, skineable margins for nonplayable item in list. Skin parameters: itemsDistances, nonplayableMargins ClockToText - Default - if hour is only one digit, then is formated with one space on start. But one digit's width is equal width of 2 spaces. Due it is for it added one space before for aligned. [ParentalControl] add missing config. Without this OpenWebIF doesn't work. Merge branch 'Dev' ParentalControl: Solution for OpenWebIf Parental Control: text tweaks Revert "Add configure switch for compiling with either gstreamer-0.10" Revert "Corrections on 5746c3291ba9b570de99e206401bfa38371ef01f." Revert "fix previous gstreamer cherry-pick" fix previous gstreamer cherry-pick Corrections on 5746c3291ba9b570de99e206401bfa38371ef01f. Add configure switch for compiling with either gstreamer-0.10 or gstreamer 1. New approach. Based upon patch from christophecvr <stefansat@telenet.be> add some machines to configure.ac ParentalControlSetup: solve issue when no pincode is available Simplify and hopefully improve parental lock -use one pincode servicepin, do not use seperate setup pin that only blocked the parental lock config menu. So once you define and enable a pincode the parentel lock menu is also protected. -remove service lists and bouquets list as the channels can be locked and unlocked via the normal configs (this was a 'source' of gsods anyway) -remove whitelists, so only blacklists can be configured now. I suggest this makes more sense -slighly improvement in channel selector when lock on channel is removed and cancel is pressed -Remove lever feature that was not really implemented yet. Note that I left one leftover of this feature as otherwise after an upgrade services are not protected. So we have now a pincode list in config with just one pincode (I suggest I will change this later in a smart phase) -Probable tiny stuff I might forget. It might also be that it could break some plugins. But hopefully these plugins will adapt to these changes. And I'm also sure this can be made even more simpler Satconfig: Close setup and return to the line with the selected tuner. TimeDateInput: add change time key P+/P- Don't disable ParentalControl if use only 'Protect on epg age' About: tweak date flashed image gsod in fullhd tooOE-ALLIANCE GIT CHANGELOG
Code
Display Moreopenvix: build 150 [oe-alliance-skins] do not build BlackSpiritHD, as it has symlink issue with folder 'img' it is symlinking to itself causing a endless loop. openvix: build 149 [BlackSpiritHD] fix white space in bb [BlackSpiritHD] fix skin bb openvix: build 148 [et7x00/et8500] Drivers update changelog: deep-standby operation optimized add enigma2-network-drivers/enigma2-plugin-drivers-network-usb-rt8723bs add rt8723bs support [BlackspiritHD] update to 0.53rc1 [cdfs] add kernel 3.19 support update branding for xcore [3rd-party plugins] Update [KravenHD] update to Version 5.7 [blackbox] fix dvb-t2 [dags] 7356 models fix missing dvb-c/t tuner [KravenFullHD] update to Version 1.7 [openatv] update bootlogo vu start [blackbox] * fix record timer [et7x00] Drivers Changelog: [3rd party] update piconmanager Revert "[et7x00/et8500] Driver" [KravenFullHD] update to Version 1.6 [KravenHD] update to Version 5.6 Merge branch '2.3' of github.com:oe-alliance/oe-alliance-core into 2.3 add meta-broadmedia [3rdparty] update media portal to 6.7.2 and add extnumberzap [ceryon] update drivers add twin support [et7x00/et8500] Driver [KravenHD] update to Version 5.5.1.2 [vix-core] add RDEPEND python-beautifulsoup, as needed for Image Manager. [ceryon] update drivers model p62 [dags] update drivers 16.02.2015, fix playback issue all files, fix timeshift issue, fix high cpu load add BlackSpirit.HD Skin Merge pull request #79 from cr3pt/patch-2 Merge pull request #78 from cr3pt/patch-1 Update usbmodeswitch-data_20131113.bb Update usbmodeswitch_1.2.4.bb Don't kill Samba either Just move to post-down, SIGHUP and flush logs Don't try to start Samba twice Samba already gets started via sysvinit-script. No need do start it again in ifup, just send a SIGHUP instead. Enforce UTF-8 update 3rd party plugins bb update 3rd party plugins bb [openvix] update full-hd novum skins to v2.2 openvix: build 147 update branding for new model openvix: build 146 fix last commit again [vuplus] xbmc fix build openvix: build 145 openvix: build 144 [vuplus} xbmc remove libcurl4 from rdepends not needed openvix: build 143 add Kraven HD & KravenFullHD Skin [ini] hdx and hdp australia model add wma/wmv support [vuplus] xbmc add missing depends libcurl4 add new oem megasat [openatv] add splash1_power.bmp [dags] rename force2solid to force2 [xbmc] Remove package error, [libbluray, libshairport] is listed in PACKAGES multiple times, this leads to packaging errors. [Xtrend] New et7x00 et8500 driversImages can be downloaded directly from the OpenViX server ( Link Below )
via a online update
menu> setup> software update.
OR
Via a Telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6
OpenViX-Apollo-Enigam2 GIT CHANGELOG
Click HereOE-ALLIANCE GIT-CHANGELOG
Click HereSome softcams now available from the image feeds.
OpenViX-IMAGES & OpenViX HD-IMAGES
Click HereOpenViX Tutorials
Click HereFollow us on Twitter Click Here
Follow us on Facebook Click Here -
Blackhole are paid to only provide images for Vu+ hardware, you wont get a BH image for any thing else as their image is illegally closed source unless you hack it your self.
-
if it is over two years old then try the bootloader and yes at that age the capacitor is something to look at too.
-
why are you mounting the USB stick ? the image does that automatically it self, there is no need for you to do it.
-
If it's displaying the starting message on the VFD then its not the capacitor, how old is the receiver and are you 100 percent sure it is not a clone ?.
Try flashing a older image again see if that resolves it.
-
Genesis from the super repo works fine on my Solo2 with the ViX image using the Vu+ XBMC plugin, although like just about every thing else most of it is affected by the UK isp bans.
-
Try a reflash of the BH image again using a different usb stick if you have one.....
Also this is worth a look if you have never done this.... duo cfe Rev 3.0
He would not have been able to run the image he was using previously if he did not have the V3.0 bootloader preflashed. remember that bootloader was released something like two years ago, so none of the images released in that time would run without it installed.
-
Pretty much depends on what your looking for in a receiver but for around £100 you could get a Vu+ Zero single tuner or the new TM Nano SE single tuner (The sponsor is knocking a further fiver off the Nano SE until feb the 6th if memory serves).
-
Just for information, we have temporarily set the image status to unstable while we test build 132. It's nothing to worry about its just that we have megrged the development image line with the master image so we need to test that every thing has gone according to plan. You can try buid 132 for your self by setting your image to use unstable updates or just wait until the status is set back to stable.
- - - Updated - - -
Another update.
Builds 133 onwards should have the XBMC plugin available for the Vu+ Solo 2, Solo SE and Duo2 available via the ViX image plugin feeds.
- - - Updated - - -
OpenViX-Apollo132 AVAILABLE NOW
The worlds first Enigma2 Team to give you FULL 1920x1080 HD Skin support
with thanks to Rossi2000.OpenViX Apollo-Enigma2 GIT CHANGELOG
Code
Display Moreopenvix: build 1037 Merge pull request #12 from AbuBaniaz/patch-1 Merge branch 'Dev' Update mytest.py [setup.xml] cosmetic Merge pull request #11 from AbuBaniaz/Dev Update setup.xml [ChannelSelection] Add missing dependency. [TimeShift] estivate should no longer be needed. Merge remote-tracking branch 'pli/master' into Dev Also hide buffering status when playing audio (radio) streams Unlinked bouquets will be renamed with .del when load unlinked bouquets is disabled ScreenSaver: Make background black, and show Tux eEPGCache::channel_data::finishEPG return void epgcache.cpp: Remove Lock from public interface epgcache::privateSectionRead: Search the eventDB just once epgcache: Don't check on "empty" in cleanLoop Timerlist - added eventNameFont for timername sizeOE-ALLIANCE GIT CHANGELOG
Code
Display Moreopenvix: build 132 [dags] update drivers fix framebuffer issu [***lake] update drivers, fix 22 khz tuner issue [***lake] add support hd1200 gbipbox - set MACHINE_FEATURES dvbc-only Fix last commit update xbmcaddon to Kodidirect [nemesis] drivers fix sum [dags] fix 7362 and 7335 ci model ac3 too [atemeo nemesis] update drivers fix frontpanel update [openatv] add vuxbmc to image build [XBMC] move from pre-installed to feeds [***lake] change bmen to 360 Add gbipbox specific mdev-mount.sh due to remote hdd feature. [enimag2] add --with-boxtype="${MACHINEBUILD}" to enigma2.bb Update HDe [dags] update gst subsink patch fix small typo [dags] update subsink for wma/wmv/flac support [dags] update drivers fix aspect letterbox, fix ac3 downmix:off hdmi output [dreambox] update dm7080 and dm820 hardware drivers [dreambox] linux-dreambox_3.4: updated kernel patch [formuler] remove splash [dags] fix checksum for new drivers [busybox] bumb build [dags] update drivers 28/29.1.2015 [ew7356] update transcoding [dags] prepare transcoding for dags3 and dags4, plugin not include yet wait for update drivers [ceryon] update drivers 28.1.2015 [dags] remove fac plugin from 7362 models Merge branch '2.3' of github.com:oe-alliance/oe-alliance-core into 2.3 [entwopiaImages can be downloaded directly from the OpenViX server ( Link Below )
via a online update
menu> setup> software update.
OR
Via a Telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6
OpenViX-Apollo-Enigam2 GIT CHANGELOG
Click HereOE-ALLIANCE GIT-CHANGELOG
Click HereSome softcams now available from the image feeds.
OpenViX-IMAGES & OpenViX HD-IMAGES
Click HereOpenViX Tutorials
Click HereFollow us on Twitter Click Here
Follow us on Facebook Click Here -
Yes unless something has changed in the drivers you should be fine to play a .iso on most E2 boxes.
