usb stick only goes in 1 way
Posts by lutz diagram
-
-
those are 2 different processors
the 1st use the 3601 and the bra uses the 3606 -
don't know what that means but it would be nice if he posted details on the old s9-s10 firmware,or at least post the tool he used.
-
6666 again makes it go away
-
hit the menu button
6666
network tab should appear -
hit menu 6666
-
if it's a clone you are stuck using clone safe firmware,which there were only 2 versions.
one came out in dec 2011 the other in jan 2012 -
F3 had it's own lan manager,so I doubt the original one will work for F5, if any.
-
at the time it was the cheapest hd box you could get.
-
it was still there
-
if it's like other receivers you have 2 choices for the timer,either schedule or record.
You have to set the timer to record instead of just changing to that channel. -
files downloaded off the net are in archives like zip or rar.There is no need to "save as" you just unarchive and load the file.
-
no,they use different processors and even the channel lists are different
-
i believe the lan manager tool has help files/examples on the subject
-
I had an old targus pa070 adapter that would work and I actually found win7 drivers for the serial portion by searching for the vid&pid of the device.
USB\VID_0711&PID_0230&REV_0102 -
you are stuck using the other old anonymousx firmware from dec 2011 or v2 from early 2012.
-
Quote
replacing thermisistor creates voltage to 1.3v which is good enough but the other firm wont boot unless u use the annon firm,,!
impossible, since you are replacing a fuse with a short.
You must have had other problems and it was just a coincidence you fixed it. -
3501 is part of the tuner.
-
you will have to run another coax to the dish for 2 receivers or a dual tuner receiver.
-
Hi
I have a ***box F5 and wanted to know what the loop connection at the back of the box is for?
Thanks in advance
for connecting test equipment like a spectrum analyzer.