Articles

Stored Position Tuner Setup

STAGE 1.

GOTO Main Menu \ Setup \ Service Searching \ Tuning
Press "OK" on "TUNER A"

http://img338.imageshack.us/my.php?image=40440488.png

Use L/R keys to change Configuration Mode to "advanced"
Move down to "SATELLITE"
Use L/R keys to select the satellite you want to add

http://img183.imageshack.us/my.php?image=41833411.png

Go down to "LNB"
Use L/R keys to select "LNB 1"
Next ensure "Diseqc Mode" is " 1.2"
(I left the others at the default setting's)
Scroll further down to "LOF" and set…
master G
Like 4
1

How to flash a Dreambox DM820 HD

1.) Turn on the power switch of DM820 HD at the back
2.) Press Power-Button at the front until on display appears "entering setup"
3.) Now you can release Power-Button and DM820 is in Rescue Mode
4.) You have to enter via browser -> "http://dm820" (without "" ) or IP-Adress of DM820 which is shown on display
5.) You will see Rescue Mode of DM820. Click "Firmware upload"
6.) Now click "Select File" and then choose image for the DM820 and after that click "Select"
7.) Next you have to click…
master G
0

How to flash a Dreambox DM800SE via a Browser

DM800 HD SE Flashing firmware by Browser
What you need to flash
You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.
You need either a DHCP server and a configured bootloader
You need a browser and a network cable. Connect your Dreambox to a switch/hub/router in your lokal LAN.
To flash a new image, you can use the…
master G
Like 1
0

How to flash a Dreambox DM800HD with DreamUP

How to flash your Dreambox DM800 with DreamUp
You require:
(Hidden Content)




First disconnect the box from main power

start the program "DreamUp


select: comport 1 or 2

use network

if network: enter the local IP from your PC, enter a remote IP for your Box


press the "Connect" - button

and then connect the box to main power

please wait now

after the flash loader is transfered into the Box select the firmware by pressing

the "Flash" - button




select the firmware…
master G
Like 2
0

How to flash a Dreambox DM800HD via a Browser

Flashing a new firmware by Browser

What you need to flash

You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.

You need either a DHCP server, a configured bootloader or a serial cable and a terminal program
like HyperTerm.

You need a browser, and a network cable. If you connect the Dreambox directly to the PC,
you need a cross cable, if you connect trough a switch/hub/router you need a…
master G
Like 1
0