Articles

How To Flash A VU+ SOLO 2 Linux Enigma2 Receiver

Flashing the Receiver:

– Fully power the receiver down via the rocker switch at the rear of the receiver.

– Make sure no USB devices are plugged into the receiver at this point.

– Insert the USB stick containing the image files into one of the USB ports on the receiver.

– Power the receiver on from the rear rocker switch and await instructions.

As your Solo2 starts to power up you should see a prompt on the receivers display asking you to press the power button, at this point you need to…
world-of-satellite.co.uk
Like 1
37

How To Flash A VU+ ULTIMO Linux Enigma2 Receiver

Flashing the Receiver:

– Fully power the receiver down via the rocker switch at the rear of the receiver.

– Make sure no USB devices are plugged into the receiver at this point.

– Insert the USB stick containing the image files into one of the USB ports on the receiver.

– Power the receiver on from the rear rocker switch and await instructions.

As your Ultimo starts to power up you should see a prompt on the receivers display asking you to press the - button, at this point you need to…
world-of-satellite.co.uk
Like 1
0

How To Flash A VU+ UNO Linux Enigma2 Receiver

Flashing the Receiver:

Fully power the receiver down via the rocker switch at the rear of the receiver.

Make sure no USB devices are plugged into the receiver at this point.

Insert the USB stick containing the image files into one of the USB ports on the receiver.

Power the receiver on from the rear rocker switch and await instruction.

As your Vu+ Uno starts to power up you should see a prompt on the receivers display asking you to press the CH - button, at this point you need to press the…
world-of-satellite.co.uk
1

How To Flash A VU+ DUO Linux Enigma2 Receiver

Flashing the Receiver:

Fully power the receiver down via the rocker switch at the rear of the receiver.

Make sure no USB devices are plugged into the receiver at this point.

Insert the USB stick containing the image files into one of the USB ports on the receiver.

Power the receiver on from the rear rocker switch and await instructions.

As your Duo starts to power up the flash progress should automatically begin with a readout of the progress on the receivers display, just sit tight and…
world-of-satellite.co.uk
0

How To Flash A VU+ SOLO Linux Enigma2 Receiver

How to Flash a Vu+ Solo receiver by USB:

Fully power the receiver down by removing the power cord or turning it off at the mains.

Make sure no USB devices are plugged into the receiver at this point.

Insert the USB stick containing the image files into the USB port on the receiver.

Power the receiver on.

The orange / red light on the front of the receiver should be solid while the image is being flashed, DO NOT power off or remove the USB stick.

After a few minutes the orange / red light…
world-of-satellite.co.uk
Like 2
0

How to flash a Edision OS Mega by USB

Flashing the Edision OS Mega by USB.

1) Power off the receiver

2) Ensure no other USB devices are plugged into the receiver while flashing.

3) Insert the USB stick containing the image files into one of thr usb ports on the receivver, rear usb port is advised if possible.

4) Power the receiver on.

5) You will be prompted on your TV screen to press and hold down ‘OK’ button on your REMOTE to commence the flashing process. The flashing process will then commence and progress show on TV…
world-of-satellite.co.uk
0

How to flash a Dreambox DM820 HD

1.) Turn on the power switch of DM820 HD at the back
2.) Press Power-Button at the front until on display appears "entering setup"
3.) Now you can release Power-Button and DM820 is in Rescue Mode
4.) You have to enter via browser -> "http://dm820" (without "" ) or IP-Adress of DM820 which is shown on display
5.) You will see Rescue Mode of DM820. Click "Firmware upload"
6.) Now click "Select File" and then choose image for the DM820 and after that click "Select"
7.) Next you have to click…
master G
0

How to flash a Dreambox DM800SE via a Browser

DM800 HD SE Flashing firmware by Browser
What you need to flash
You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.
You need either a DHCP server and a configured bootloader
You need a browser and a network cable. Connect your Dreambox to a switch/hub/router in your lokal LAN.
To flash a new image, you can use the…
master G
Like 1
0

How to flash a Dreambox DM800 HD SE with DreamUP

DM800 HD Se Flashing with DreamUp
How to flash your Dreambox DM800 HD SE with DreamUp
You require:
(Hidden Content)




First disconnect the box from main power

start the program "DreamUp




select your comport

maybe use network

if network: enter the local IP from your PC, enter a remote IP for your Box



press the "Connect" - button

and then connect the box to main power

please wait now

after the flash loader is transfered into the Box select the firmware by pressing the "Flash" -…
master G
thumbs up 1
0

How to flash a Dreambox DM500 HD via a Browser

DM500 HD Flashing firmware by Browser
What you need to flash
You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.
You need either a DHCP server and a configured bootloader
You need a browser and a network cable. Connect your Dreambox to a switch/hub/router in your lokal LAN.
To flash a new image, you can use the…
master G
0

How to flash a Dreambox DM500 HD with DreamUP

DM500 HD Flashing with DreamUp
How to flash your Dreambox DM500 HD with DreamUp
You require:
(Hidden Content)




First disconnect the box from main power

start the program "DreamUp




select your comport

maybe use network

if network: enter the local IP from your PC, enter a remote IP for your Box



press the "Connect" - button

and then connect the box to main power

please wait now

after the flash loader is transfered into the Box select the firmware by pressing the "Flash" - button…
master G
Like 2
13

How to flash a Dreambox DM8000 HD via a Browser

Flashing a new firmware with Browser
What you need to flash

You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.
You need either a DHCP server, a configured bootloader or a serial cable and a terminal program
like HyperTerm.
You need a browser, and a network cable. If you connect the Dreambox directly to the PC,
you need a cross cable, if you connect trough a switch/hub/router you need a…
master G
2

How to flash a Dreambox DM8000 HD with DreamUP

How to flash your Dreambox DM8000 with DreamUp
You require:
(Hidden Content)





First disconnect the box from main power

start the program "DreamUp


select: comport 1 or 2

use network

if network: enter the local IP from your PC, enter a remote IP for your Box


press the "Connect" - button

and then connect the box to main power

please wait now

after the flash loader is transfered into the Box select the firmware by pressing

the "Flash" - button




select the firmware…
master G
Like 1
0

How to flash a Dreambox DM800HD with DreamUP

How to flash your Dreambox DM800 with DreamUp
You require:
(Hidden Content)




First disconnect the box from main power

start the program "DreamUp


select: comport 1 or 2

use network

if network: enter the local IP from your PC, enter a remote IP for your Box


press the "Connect" - button

and then connect the box to main power

please wait now

after the flash loader is transfered into the Box select the firmware by pressing

the "Flash" - button




select the firmware…
master G
Like 2
0

How to flash a Dreambox DM800HD via a Browser

Flashing a new firmware by Browser

What you need to flash

You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files. Don't try it - it won't work.

You need either a DHCP server, a configured bootloader or a serial cable and a terminal program
like HyperTerm.

You need a browser, and a network cable. If you connect the Dreambox directly to the PC,
you need a cross cable, if you connect trough a switch/hub/router you need a…
master G
Like 1
0

How to flash Gigablue HD 800 SE PLUS Linux Enigma2 Receiver

Flashing the Receiver.

1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the usb ports on the receiver, rear usb port is advised if possible.
4) Power the receiver on.
5) When the receiver powers up you will see USB then CONF on the receivers display.
6) As soon as you see CONF press the OK button behind the front flap of the receiver to start the flashing process.
7) If…
world-of-satellite.co.uk
Like 1
0

How to flash a Gigablue HD 800 SOLO Linux Enigma2 Receiver

Flashing the Receiver.

1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the usb ports on the receiver, rear usb port is advised possible.
4) Power the receiver on.
5) When the receiver powers up you will see USB then CONF on the receivers display.
6) As soon as you see CONF press the OK button behind the front flap of the receiver to start the flashing process.
7) If successful…
world-of-satellite.co.uk
Like 1
0

How to flash a Gigablue HD 800 UE Linux Enigma2 Receiver

Flashing the Receiver.

1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver
3) Insert the USB stick containing the image possible.
4) Power the receiver on.
5) When instructed via the receivers display flashing process.
7) If successful the receiver will reboot it self after the flashing process has completed.
8) Remove USB stick that contains the images files.

(Hidden Content)
world-of-satellite.co.uk
Like 1
0